How To Improve Your Print Effect With Inkjet Printer ?

In recent years, inkjet printing technology in a wide range of industries, inkjet printing to facilitate the production, but how to use a good inkjet printer, how to strengthen the inkjet equipment, process management, good professional reserves and so on , Are the current must pay attention to the problem.

First, the management of inkjet professional technicians
Inkjet than the roller, screen printing in the personnel skills on the higher requirements, in addition to understand the basic operation of inkjet, but also have a certain computer, transfer capacity, have a stronger sense of responsibility, so inkjet personnel management should focus on In the skills training, discipline system constraints.
1, inkjet technicians should be familiar with the basic mechanism of inkjet equipment and operation, know how to change the ink process, proficient, skilled PS version, the correct maintenance and maintenance of inkjet equipment. Can solve the inkjet printing process appears drawing, drop ink, ink, ink, hanging ink and other common problems, can correctly identify and deal with inkjet equipment alarm failure.
Training work mainly for the above issues, and must be practicing training, after the practice of assessment can be posts.
2, personnel discipline and system management. In addition to the personnel who have been allowed to access, other personnel without the consent of the workshop manager to prohibit access to the inkjet room, inkjet printers to supervise the management of responsibility.
3, the inkjet software parameters in addition to the designated training of the inkjet in charge of the staff, the rest of the operator shall not be free to prevent changes to the parameters of inkjet equipment to work properly. Regularly back up the configuration files on the machine so that the system can quickly restore various settings and restore production due to an unexpected crash. Inkjet device USB interface prohibit the insertion of U disk, generally only inserted through the special anti-virus processing U disk, otherwise the system is infected by the virus, easily lead to computer operating system and inkjet software system failure or error.
4, equipment failure, must be handled by professional maintenance personnel. Machine failure, or pull the line in the cleaning nozzle is invalid, the immediate shutdown notice inkjet management.


Second, the management of inkjet ink
1, manage the ink into the factory acceptance. Each batch of ink into the factory should be sampled to check the ink color, ink viscosity, the proportion of ink, if the three indicators and the standard sample no difference, you can think of this batch of ink qualified, of course, there are other indicators of ink, but the manufacturer No need to put the appropriate testing equipment for testing.
2, the management of the use of ink. In addition to the provisions of the ink, but also should be careful not to add the wrong ink, add the wrong ink after the re-cleaning takes a long time, delay production. If the ink in the ink tank for more than a month did not run out, should promptly update the ink, otherwise it is prone to plugging and so on.
3, manage the precipitation of ink problems. Because the ink is composed of inorganic colorants, organic solvents, dispersants and other ingredients, long-term after the toner particles will settle to the bottom of the container to form pigment layer, known as precipitation, precipitation, the ink viscosity will be reduced, hair color will Weakened, other indicators will change, but the ink after standing precipitation is a normal phenomenon, is inevitable.
Properly manage the ink, reduce the precipitation, pay special attention to the following:
1) Store the ink in an indoor temperature of 15 to 25 ° C.
2) as soon as possible in the shelf life (within 6 months) run out, the sooner run out, the lower the risk of ink problems. And should be planned in advance warehouse warehouse ink inventory, should not be stored too much, and arranged to store the ink on the machine once a week to shake the ink to reduce the settlement, is conducive to the use of production, re-production should be 10 to 15 days before the single stocking.
3) ink before use, the application of red ink and redistribution, shake ink time should be more than 30 min, which 10 min roll once the ink bottle. After shaking ink, do not rush to open the lid, should be standing for more than 10 min, so that the bubble fully eliminated. When opening the lid, pay attention to aluminum foil do not fall into the ink tank.

Third, the inkjet printing process technology management
Inkjet production on the stability of the field process has a relatively high demand, need attention. Usually require pre-printing blank temperature can not be higher than 45 ℃, and glaze volatilization of water vapor should be as low as possible, or easily lead to hanging ink so that ink drops; too high billet temperature and water vapor will lead to nozzle, board life shorten.
Inkjet process management should pay attention to detail management and quantitative management, after the first understanding of the production number, check the standard version and inkjet effect, check the belt speed, jet height and other parameters, if in doubt immediately asked the shift staff, check the amount of ink, Must be added in time.
Check the temperature of each cartridge once every 1 h, whether the vacuum degree is different from the set value. Check the flow of the natural return pipe of each cartridge once every 1 h, and must flow above half the tube. Every 1 h to clean the belt scraper once, to prevent the accumulation of dust affect the normal operation of the inkjet. Strictly monitor the printing effect, every 1 h on the printing effect, pattern, color and sampling once and make a record. Every 2 h must wash the nozzle once, there is a serious increase in the number of cleaning line cleaning. In normal production, the inkjet machine must use the automatic flash spray function to protect the nozzle.

Fourth, the management of inkjet printing equipment
Scientific management of inkjet equipment, both to extend the service life of equipment, can reduce the occurrence of equipment failure, improve production efficiency. Ceramic inkjet equipment management, the main focus on the nozzle maintenance, filter replacement, ink system cleaning management, maintenance management, inkjet working parameters and software management, fault management and so on. Specific details include the following:
1, nozzle maintenance. Production and shutdown should pay attention to the maintenance of the nozzle, the production should be automatically every hour an hour cleaning nozzle, for exhaust, tube, wipe the nozzle and other manual operation, to do the whole dust, Electrostatic protection, to avoid improper operation caused by dust adsorption to the nozzle caused by plugging and other defects. Wipe the nozzle should wear protective gloves, the use of infiltration cleaning fluid dedicated clean cloth, spray nozzle in the same direction of the same direction to wipe. Wipe once every wipe to clean the clean part with a clean cloth. Spray hole parts and nozzle sheath to separate the wipe, is strictly prohibited by the jacket to the nozzle part of the wipe.
Routine maintenance should also pay attention to the overall cleaning of the nozzle clean, in addition to the nozzle area is the most important, the non-working surface of the rack, nozzle shell, board, etc. should also be cleaned up in time. Pay attention to check whether the inlet and outlet ink leakage, leakage ink, bubbles, ink precipitation and other anomalies. Cleaning operation to disconnect the nozzle power, let go of the body of static electricity, good dust control measures.
2, scientific and rational use of filters
1) Regularly clean the entire ink system. Running time after a long ink tank, filters, pipes, nozzles, etc. will have a certain ink particles deposition adsorption, timely and thorough cleaning is conducive to the overall operation of the inkjet and post-production stability. Need to pay attention to the cleaning must be completely clean, or may be due to sediment loose and not clean up lead to nozzle plugging, the effect is not good. According to the actual situation of ceramic production line, usually in the end of the kiln overhaul when the thorough cleaning ink Road.
2) regular replacement of the filter, usually every 2 months to change once. Filter is an important part of the normal operation of the nozzle protection, the use of a long time there will be part of the residue deposition, affecting the efficiency of filtration, increase the ink pump, circulating pump work intensity, easy to damage the ink pump and circulation pump, Leading to lack of ink.
3) do downtime maintenance
Inkjet machine is not in production, in addition to automatic micro-spray and other maintenance measures, the manual should be manually squeeze ink cleaning 2 to 3 times, continuous high-dimensional maintenance with 20 to 30 times. At the same time check the main technical parameters and ink system, print the state diagram to check the status of the nozzle, so that problems in a timely manner. For a long time do not produce the ink should be appropriate to reduce the operating temperature. Reduce the amount of ink stored in the ink tank, regular printing consumption and then add the amount of new ink.

Fifth, the use of inkjet environment management
In order to reduce the environmental dust on the nozzle pollution, the need for inkjet room environment for strict management.
1, inkjet room need to maintain a positive pressure. Positive pressure environment is conducive to reducing the concentration of environmental dust, according to the relevant personnel pointed out that the best positive pressure of the inkjet room can be expressed by a basic formula: inkjet room required the best positive pressure air volume = ink waste ink Fan air volume +1000 m3 / h (fixed positive pressure), the greater the room volume, positive pressure required air volume of the fixed value is a corresponding increase.
2, to keep the room temperature at 18 ~ 24 ℃, humidity in the 40% to 65%. Good temperature and humidity, is conducive to equipment cooling and inkjet system stable work.
In order to maintain a good inkjet environment, we must also pay attention to the hygiene and cleanliness of the inkjet room, such as into the inkjet room to be replaced slippers, non-inkjet staff, without permission shall not enter; each class on the outside of the inkjet Wipe, every time dragging the ground; regular fan, air filter, air conditioning filter maintenance.

With more and more inkjet machines put into use, the factory in the follow-up management must be further improved. "Want to do good things must first of its profits," the scientific management of inkjet will become more important.

Welcome to contract us !
Company:nanjing hi transfer digital technology co.,limited
website:http://hitransfer.com/index.php
facebook:https://www.facebook.com/techsublimation
twitter:https://twitter.com/techsublimation
linkedin:https://www.linkedin.com/in/tech-sublimation-548a7a133/
google+:https://plus.google.com/u/0/107910599828124340419
vk:https://vk.com/sbpaper
whatsapp:+8615756007679

Do You Know Continuous Ink Supply System for Large-format Inkjet Printers (2)?

This time, we followed the last description, talk about how to solve the situation when the ink system meet problems.

Six, Solution for the ink system 
   (A) bubble failure
    Fault phenomenon
    ◇ continuous ink system has been working for a few months, and now can not print.
    ◇ every day in the normal print before the implementation of many times to clean the order.
    ◇ print the test line is always a fixed disconnection.
    ◇ just start the test line is normal, but after printing a few pages appeared disconnected.
    ◇ print is always missing (usually black)
    ◇ external ink cartridges on the low has been a long time, and now ink pipeline is not into the ink.
    Solution
    The above phenomenon is due to the ink bubbles in the cartridge caused by the bubble. Continuous use of the ink supply system After six months of use, a small amount of tiny air bubbles from the ink and the accumulation of a small amount of air bubbles from the printhead into the print cartridges gradually expand the ink. Maintenance methods are not complicated, take out these bubbles for the normal ink can be. Incorrectly lowering the external ink cartridge will also accelerate the formation of the ink bubble, even if a continuous ink supply system using EPSON original ink cartridges is used.
    To troubleshoot this problem, follow these steps:
    1, the continuous ink system from the printer to remove, after removal, the print cartridge should not be inverted, to be placed on the same level with the external ink cartridges. If a seal plug is used at the initial installation, insert the seal plug into each outlet of the bottom of the cartridge. For EPSON late production of the cartridge with a memory chip models, because the ink port with a valve, so no need to seal the plug. Install a new or used EPSON original ink cartridge on the printer. This cartridge must be an unpacked, unpacked, undamaged original ink cartridge. The genuine original EPSON cartridge can guarantee the correct test result , This step is essential.
    2, print the ink car after homing, the printer will perform a natural cleaning time, please perform the nozzle check print test line. You can repeat the cleaning and printing test line 3 times, until the test line is completely normal. And then print a four-color or six-color block test chart (depending on your model, print settings in 360DPI
/
Plain paper mode), color test chart must be printed continuously 3 to 5, while observing the printer is working properly. If the print has an exception, repeat the above steps. If you do not have more than 3 times after cleaning, the printer is still not normal, allowing the printer to rest for 12 hours and then test. In most cases the printer can return to normal.
When the printer prints the color chart is stable, it is ok that your printer nozzle is intact. Once you have reached your printer's normal conclusion, you can continue with the following steps to maintain your continuous ink supply system.
If you still can not print properly after using the above method, please contact the EPSON service center or contact the printer repair shop for repair. Although at this time non-continuous ink system failure, contact with us can still get the appropriate help. Before deciding whether to repair the EPSON service center, please remove the parts and labels of the continuous ink supply system and do not refer to EPSON using a third party ink or continuous ink supply system, only that you are using EPSON original ink cartridges and Explain the phenomenon of failure can be.
    3, when your printer is working properly, the following steps can make your continuous ink supply system back to normal.
    Add 50 ml of disposable syringe tube (remove the needle) with a small elbow and insert it into the ink outlet at the bottom of the print cartridge connected to the continuous ink supply system and begin to dip out of the cartridge slowly. Should be through the ink through the pipeline from the external ink cartridge inhaled into the print cartridge, and then by a steady stream of inhalation into the syringe tube. When the syringe tube is full, observe how much ink and foam will be drawn to see what causes the continuous ink supply system to print poorly. The printer does not print the bubble-like ink normally, and you must pull them out through the syringe.
Unlock the ink cartridge from the external cartridge and inject the ink from the syringe into the external cartridge. This process does not waste ink, and the foamy ink turns into liquid ink after two hours.
This ink extraction process is repeated with a syringe until almost no foam is seen in the extracted ink. This takes about 100 ml of ink to be recycled. That is, it is necessary to repeat the two ink extraction process.
Note: the ink extraction process to be slow, you can pause, do not be too fast.
According to the yellow → light red → magenta → light blue → cyan → black order to carry out the above ink extraction process, color change operation, be sure to use warm water to clean the syringe. If your cartridge uses a sealing plug, the other ink outlets are sealed with a sealing plug when operating on a color chamber.
    4, the ink cartridges together with the continuous ink supply system back to the printer, according to the operation of the second step to test debugging until normal.

   (B) pipeline blockage failure
    Fault phenomenon
    ◇ Many times the implementation of the ink extraction process, the syringe pumping force needs a lot, and the majority of the air out.
    ◇ have a completely disconnected (usually black)
    Solution
    According to the "bubble generation in the cartridge" troubleshooting program, if it is found that there is a great resistance when drawing with a syringe, and no ink flows into the syringe, it can be concluded that the pipe is clogged, Pipe clogging phenomenon and its handling methods, please check and troubleshooting in order.
    ◇ out of ink mouth blockage.
    Check the method: the external box above the seal plug, inverted. From the external cartridge out of the ink tube, check the Yao is blocked.
    Exclusion method: with the syringe needle into the ink mouth, you can clear.
    ◇ ink clogged clogged.
    Check the method: the ink out of the elbow from the cartridge, and then pull out the ink from the ink line elbow, check whether the blockage.
    Exclusion method: clean the elbow with water, blowing with your mouth, you can clear.
    ◇ ink pipeline blocked.
    Check the method: to ensure that the ink out of the mouth and the ink elbow are not blocked, with a syringe from the ink cartridges ink, if the ink inside the ink cartridge does not float, can be inferred that the ink pipeline blockage.
    Remedy: first check whether the ink at both ends of the pipeline caused by foreign body blockage. If there is a short crystal or foreign body, you can use straightened paper clips to remove it; if it is blocked through the long pipeline parts, please contact the local dealer to buy a new six rows of pipelines (four rows of pipelines).
    ◇ The air filter of the external cartridge is blocked.
    Inspection method: In the above three may have been excluded circumstances, can be judged as an external cartridge air filter plug.
    Remedy: Clean the air filter, dry water, you can. [6]
   (C) the chip is damaged
    Fault phenomenon
    ◇ ink on the printer instructions red light is always bright, shut down and then open is also invalid.
    The decoder is not valid after decoding the cartridge.
    ◇ The printer does not perform cleaning after pressing the cleaning key.
    ◇ When the print job is canceled, the ink on the printer indicates that the red light is on.
    When the computer is restarted, the ink on the printer indicates a red light. [7]
    Solution

 1, EPSON models. The disadvantage is that the cartridge is removed and then returned, the print will be broken, you need to have a repeated cleaning and testing process.
    2, if it is a cartridge with a chip model of the above phenomenon, please carefully check whether the following possible:
    The ink cartridge is not installed in place.
    The chip position on the cartridge is not correct.
    ◇ chip on the chip stylus deformation.
    ◇ chip damage.
    The first two cases through the operation can be troubleshooting, as long as the adjustment of the location of the chip, the cartridge gland pressure on the ink cart on it. The third case can be found by observation, this failure is because there is no fixed chip installed and forced to remove the cartridge caused by! The But because of the repair will have to have the experience of maintenance personnel will be removed from the printer nozzle, and then remove the needle to correct or replacement. For the case of chip damage, the use of the decoder on the original cartridge chip memory refresh mode, it will often appear, then you can use another decoder to re-refresh once, if it is not normal, can only replace the chip. Continuous ink supply system is equipped with a real permanent ink cartridge chip, because the installation of continuous ink supply system does not need to remove the cartridge to decode, the possibility of chip damage is very small. At present, the regular manufacturers of the system for the production of the chip are very high quality, but the installation of the same time there will not recognize the machine, the solution can use the skin, is the student with the rubber, repeatedly wipe the chip position. The re-installation is basically a recognition of the cartridge.
    3, the method of decoding the chip to refresh In addition to hardware, software technology has developed rapidly, but some software in the use of abnormal problems or damage to the printer caused by the depth, so before use must have a senior technical staff Do the guidance, do not do not try to grasp, because the various software usage varies, limited space here is no longer one by one introduced. Should keep in touch with us in order to get the latest software technical support.

   (4) ink gravity phenomenon
    Fault phenomenon
    ◇ When printing, there is a small ink dot on paper.
    ◇ print on the paper often appear when the large leakage of ink spots.
    ◇ Regardless of what paper to print, there are always some ink on the edge of the ink.
    ◇ The printer feed roller always has some ink stains.
    ◇ print the test line is always broken, and the phenomenon of color string.
    Solution
    A siphon breakpoint is designed in a continuous ink supply system. If there is no such design, the ink will flow along the ink from the external ink cartridges automatically flow to the printer, resulting in leakage, broken wire failure. Our filling technology for empty cartridges allows the filling of empty cartridges to have a small portion of the air space, so that these air is suspended at the top of the cartridge is very necessary.
    The following conditions can cause ink gravity to cause printing to be abnormal:
    First, the external ink cartridges raised, the liquid level than the print nozzle horizontal 50 mm, due to ink flow within the ink gravity caused by gravity, then the ink will flow out from the print nozzle, lift the higher the faster flow. At this point the print head to withstand the exceptionally large ink pressure, printing will appear leakage, broken, the color of the string and other very serious situation.
    Second, the print cartridge is too much ink, because there is no siphon breakpoint, ink pipeline and print cartridge as a whole, even if the external cartridge is not raised, will lead to slow flow of ink. At this point there will be printed ink leakage, broken the phenomenon.
    Third, the external ink cartridges raised, the liquid level than the printing nozzle horizontal 30 ~ 50 mm, this time the ink will not flow, but the nozzle is also subject to the static pressure of the ink, so the same print will be broken, the phenomenon of color string The
    Fourth, the external ink cartridge is lowered, the liquid level is lower than the horizontal level of the print nozzle 300 mm. As the ink gravity in the ink supply line causes the reflow of the external ink cartridge, the air enters the print cartridge from the print head, The lower the air, the faster. At this point the print will be out
Is broken, the color of the string and other very serious situation.
    If any of the above problems occur with your printer, check that the fault is caused by an elevated or lowered external cartridge. (Warning: continuous ink supply system in use requires external ink cartridges must be placed in the same level on the printer !!!)
    Eliminate the above first, three, four cases caused by the failure of the method is very simple: the external ink cartridges placed in the same level with the printer, wait 2 hours after the print on the natural normal. And for the second case caused by the failure, the following steps can be ruled out:
    ◇ put the ink elbow from the print cartridge on the set, on the high, pay attention, do not let go, the ink will flow out from the elbow.
    ◇ Let the printer start working, playing the picture A4
5-10 sheets, and then the elbow can be inserted into the printer cartridge, be careful not to insert the wrong color. If necessary, perform the cleaning and printing test program in the application and debug the printer properly.
    If there is a lot of ink stains in the paper path, you can find a color spray paper, wet the paper with alcohol, and then press the paper feed button on the printer, so that the alcohol soaked in alcohol 10 times, can play a very good cleaning effect.

   (5) ink cartridges leak
    Fault phenomenon
    ◇ normal use, an ink pipeline appeared throughout the air.
    ◇ normal use, each of the ink pipeline are filled with air.
    Solution
    As mentioned earlier, the continuous ink supply system connected to the upper part of the print cartridge has a short section of air is always present, this is to avoid the siphon principle caused by ink gravity phenomenon. If you see some small air bubbles in the ink line, do not worry, they will be printed on the upper part of the ink layer to absorb the absorption, which is normal.
The air layer in the upper part of the cartridge will expand or contract with the change of the indoor temperature. If the ink is not more than 150 mm in the ink supply line at the interface with the print cartridge, this is due to the air layer Expansion caused by, is a normal phenomenon. However, if the entire ink line appears air, this is the ink cartridge leak or refueling elbow interface is not caused by the seal.
    If there is an air in the entire section of the ink supply line, check the seal at the ink filler and the print cartridge. You can remove the ink elbow to check out, and then re-plug like. If each of the inking lines is filled with air, check that the print cartridges leak and replace the ink cartridges (in most cases, the cartridge labels are not sealed).

Welcome to contract us !

Company:nanjing hi transfer digital technology co.,limited

website:http://hitransfer.com/index.php

facebook:https://www.facebook.com/techsublimation

twitter:https://twitter.com/techsublimation

linkedin:https://www.linkedin.com/in/tech-sublimation-548a7a133/

google+:https://plus.google.com/u/0/107910599828124340419

vk:https://vk.com/sbpaper

whatsapp:+8615756007679

What Can Wide-format Inkjet Printer Used for ?

With the continuous development of digital printing technology, more and more related manufacturers began to use digital printing technology to produce their own goods. Most of the products produced in this way have colorful, clear lines, easy to fade, save time for a long time, and so on, because this technology is also increasingly received manufacturers of all ages.

So, the use of digital printing technology to produce goods is how is it? In fact, the portrait, landscape, text and other graphic use of sublimation ink with inkjet printer to mirror the way to reverse the printing on the sublimation of paper, and then through the thermal transfer equipment heated to 200 degrees Celsius, sublimation paper Of the sublimation of ink will be in the form of gasification into the substrate, so that the image on the sublimation of the color of the image to the textile, porcelain cup, porcelain plate, porcelain plate, metal and other materials on a new process The This is the most common form of digital printing technology, as technology continues to move forward, more and more new forms have begun to slowly show up. There is now a direct way to use digital printing, eliminating the need for the middle of the sublimation of the paper to print the process, print directly to the substrate above.

From the digital printing process can be seen, no matter what kind of printing methods, need to use a wide-format inkjet printer, it is a wide-format format digital printing equipment, sales data from the past few years, the market The demand for wide inkjet is also increasing. Today to bring you all together to inventory those who need wide-format inkjet printer industry.

The first is the indoor and outdoor advertising printing industry. With the rapid economic development, to promote the vigorous development of the advertising industry, indoor and outdoor advertising everywhere. Advertising is mainly used to do publicity, good indoor and outdoor posters can be very good to attract users, good publicity screen needs high-precision print to the effect. Wide inkjet printer printing accuracy in all types of printing equipment in a leading position, has become the advertising industry favored wide inkjet printer the main reason.

Moreover, the public facilities industry. Bus station instructions, road signs, signs, park tips and so can be used to complete the printing equipment. Pictorial machine print color beautiful, eye-catching, in the public facilities is also more applications.

 Home improvement industry. Beautiful wallpaper, art decorative paintings, soft film ceiling, etc., with the improvement of people's living standards, the pursuit of beauty is also constantly changing in recent years in the home improvement industry is also widely used.

Garment industry, has been the most human clothing is an item, with the economic conditions continue to improve, more and more people began to pay attention to their dress, more and more attention to personalized, environmentally friendly consumer demand. Which makes the garment industry on the wide demand for inkjet printers continue to increase.

Several of the industry is a wide range of inkjet printers involved in several of the more important industries, but also that the wide range of inkjet printer applications in the gradual widening. Our long-term sales of wide inkjet printer, print the effect is good, print quality is high, if you also need wide inkjet printer, please feel free to contact us.

Welcome to contract us !
Company:nanjing hi transfer digital technology co.,limited
website:http://hitransfer.com/index.php
facebook:https://www.facebook.com/techsublimation
twitter:https://twitter.com/techsublimation
linkedin:https://www.linkedin.com/in/tech-sublimation-548a7a133/
google+:https://plus.google.com/u/0/107910599828124340419
vk:https://vk.com/sbpaper
whatsapp:+8615756007679

Why Wide-format Inkjet Printer Require Large Capacity Cartridge System?

Wide-format inkjet printers, digital printing printing the necessary machines, with the digital printing industry continues to develop, wide inkjet printers are constantly improving technology, continue to develop, the quality is getting higher and higher. Wide inkjet printer's high quality is reflected in the print effect above, print out the pattern color reproduction high, colorful, clear lines; the other hand, wide inkjet printer is now generally equipped with a large capacity even for the cartridge system.

Why is a wide inkjet printer requiring a large capacity for a cartridge system? Large-scale inkjet printing machine, you need more stable inkjet printing performance, high-speed high-precision printing is its important performance, while a long time without any succession printing, large capacity even with the application of ink cartridges system, a lot of benefits, It is more efficient to play it efficiently.

Large capacity even with the ink cartridge system by the external ink cartridges (ink bottles), and even the ink tube and bracket and other accessories, ink bags and other three parts; the use of siphon principle, large capacity even for the ink cartridge system is installed in two In a container connected by a siphon, the ink flows from a vessel of high pressure into a vessel of low pressure. It works and performance in the printing process, the printing machine ink cartridges will continue to send ink to the nozzle, while the pressure inside the cartridge is also declining, need to inhale the same capacity of air to maintain pressure balance, even for the system is from the cartridge The air supplied by the vent hole is replaced with ink, and the ink cartridge is fed with the ink at the same time as the ink is supplied to the nozzle, and the ink in the ink cartridge is supplied by the external large-capacity ink cartridge through the ink tube The ink cartridge can always add ink, so that you can ensure that the ink cartridges inside the printer always have enough ink to the print nozzle, so that the printing machine can continue uninterrupted in continuous printing, a refill, you can easily achieve a long time unattended Inkjet printing.

In addition, the printing machine large capacity continuous ink supply system applications which advantages?
 1, large capacity even for the application of the system, you can make a large wide printing machine can add ink for a long time continuous inkjet printing; truly unattended, extremely easy to use.
2, high-capacity ink cartridges automatically ink, do not have to worry about the ink cartridges in the ink capacity is too low or lack of ink to print, do not worry about the ink splashed outside, eliminating the need for frequent work to add ink trouble, so you save a lot of labor.
 3, in the printing machine printing process, no need to stop adding ink, to avoid the ink during the process, the ink shaking, there bubble, there ink break problem, resulting in greatly improved efficiency.
 4, printing machine Dalian for the application of the system, even for the ink cartridge sealed ink for ink, ink in a sealed environment to run, put an end to dust, impurities into, to avoid secondary pollution, greatly improve your printing machine nozzle life.
 5, printing machine Dalian for the system plug-and-play, ink cartridges are free disassembly, easy transportation.

 All in all, the wide-format inkjet printer has a lot to do with the application of the ink cartridge system, allowing your inkjet printer to print more efficiently and earn more profitable for your inkjet print order.

Nanjing HiTransfer Digital Technology Co., Limited. is a company specializing in thermal sublimation services, we can provide a set of sublimation products. Including our wide-format printers, our wide-format printers are equipped with a continuous ink supply system for easy user use, and our wide inkjet printer has good print quality, clear lines, and we often do sample testing. Interested, welcome to our official website.

Welcome to contract us !

Company:nanjing hi transfer digital technology co.,limited

website:http://hitransfer.com/index.php

facebook:https://www.facebook.com/techsublimation

twitter:https://twitter.com/techsublimation

linkedin:https://www.linkedin.com/in/tech-sublimation-548a7a133/

google+:https://plus.google.com/u/0/107910599828124340419

vk:https://vk.com/sbpaper

whatsapp:+8615756007679

Do You Know How to Install Your Inkjet Printer?

Inkjet printer technology content is high, the parts are very precise structure, the correct use and operation of the printer, to reduce the probability of the printer and extend the service life has a role can not be ignored.

1, Placement
Choose a better placement, you can avoid many unnecessary trouble.
A, put the printer on a horizontal, stable surface.
B, place the printer in a place where it is easy to connect to a computer or network interface cable, and it is easier to cut off the power supply.
C, leaving enough space for operation and maintenance; leave a large enough place in front of the printer to allow paper out.
D, to avoid the use of temperature and humidity in the sudden place to place and place the printer, the printer should be away from direct sunlight, strong light source and heating device.
E, avoid placing the printer in a vibrant place.

2, Cable connection
A, confirm the computer, the printer is in a shutdown state, and cut off the power.
B, according to the "Printer Manual" attached to the computer or network interface cable connection.
C, check the voltage on the label on the back of the printer to confirm that the voltage required by the printer matches the socket voltage of the plug you plugged into.
D, confirm that the above three steps are correct, then connect the power supply.

3,Boot use
A, first open the printer, and then open the computer.
B, with the attached "printer manual", fitted with ink cartridges. When installing ink cartridges, there are several precautions.
(1) When the ink cartridge is not ready for use, it is not advisable to remove the packaging.
(2) After removing the lid and tape of the ink tank, install the ink tank immediately.
(3) Take the ink tank, do not touch the print head.
(4) The print head contains ink, so the print head can not be inverted, nor shake the ink tank.
C, when the cartridge is installed, the implementation of "print head" cleaning operation, the printer debugging to the normal use of the state.

4, Software settings
A, the driver installation: the general purchase of the printer, the manufacturers will be random with the driver: Windows control system also has part of the printer driver. You can also download the driver directly from the manufacturer's website. But the best is to download the driver from the factory's website, because the driver downloaded from the Internet is the latest driver.
B, open the computer taskbar settings in the "printer", the target printer corresponding to the driver set to "default printer."
C, in the use of the application software, and then according to the specific needs of the printer "property" to set.

5,Shut down
A, before shutting down, should check and confirm that the printer is in the normal standby state.
B, if the ink light tips should promptly change the cartridge, the printer in the implementation of other work should wait for the completion of the operation can only be turned off.
C, shut down, you should turn off the printer power key way to shut down, do not directly cut off the power of the way off, otherwise it will have serious consequences.
D, shut down, apply the cloth to cover the printer, so as not to cause damage to the printer caused by dust.

There are three main types of printers on the market: needle, inkjet and laser printers. Needle printer has been a glorious period, gradually into the dusk; and laser printers although the price is declining but compared with the mainstream color spray or a certain gap, and if you want to use color, then the price will be much higher. In this case, the inkjet printer flush half of the situation is not surprising.


Welcome to contract us !
Company:nanjing hi transfer digital technology co.,limited
website:http://hitransfer.com/index.php
facebook:https://www.facebook.com/techsublimation
twitter:https://twitter.com/techsublimation
linkedin:https://www.linkedin.com/in/tech-sublimation-548a7a133/
google+:https://plus.google.com/u/0/107910599828124340419
vk:https://vk.com/sbpaper
whatsapp:+8615756007679

How to Do When Inkjet Printer don't Recognize the Cartridge?

With the development of digital printing technology,  sublimation printing has become an indispensable industry, a printing technology, and inkjet printer is to achieve sublimation printing indispensable machine equipment, because of its good printing, high product quality being widely used.

But inkjet printers in the use of the time often there will be such a problem, such as inkjet printer can not identify the cartridge is one of the more serious problems, there is no way to identify the cartridge, then there is no way to implement the print order, there is no way Print out the pattern, then why is there such a problem, what is the solution?

In fact, inkjet printer no way to identify the cartridge, which is the ink method and the details of the process caused by the failure, the main reasons and solutions are as follows:

1, the process of adding ink, the circuit board stained with ink or other debris affect the ink and the printer within the needle point of contact, the solution: you can use the rubber to wipe the circuit board clean, clean up the miscellaneous after the re-installed;

2, if not the amount of ink recovery operation, each time the print will pop up the window prompts, lack of ink to cancel the print, then ignore, wait a few seconds will start printing;

3, suggesting that an ink cartridge is not properly installed, or an ink cartridge without ink does not execute the print command, this time you can press the second flashing button on the printer panel for 8 to 10 seconds to reset the cartridge, Start printing.

4, black ink cartridges have been exposed from the nozzle has been exposed, the problem is even more simple, but also points the situation, the general ink cartridges if it is the first time to add ink, if the ink after ink leakage phenomenon, The amount of ink more than the cartridge cavity sponge adsorption capacity, so leakage of ink. If the ink cartridges to drink a lot of times, the cartridge used for a long time, this may be the aging of the foam within the cartridge, or before the use of poor quality ink, resulting in damage to the corpus caverns, lost ink absorption capacity.

In addition, here on the nozzle cartridge on the daily maintenance of some small recommendations:
1, the nozzle of the two key parts of the cartridge: the bottom of a long strip of metal both print head, can not scratch with hard objects, can not be exposed to the air for a long time.

2, the side of the cartridge circuit board can not be water, over time can be used to erase the metal contacts on the oxide, to ensure that it can normally contact the printer with the needle point, can not hand directly pinch the circuit board surface to prevent The hands of the static damage to the chip data.

This is about the printer to identify the reasons for the cartridge and the solution, if the printing process encountered a similar problem, do not impatient, in accordance with the above provides a way to solve this problem.

We are a professional manufacturer of inkjet printers and offer inkjet printers for long periods of time. If you have any problems with your inkjet printer, or if you need to purchase inkjet printers, please feel free to contact us.



Welcome to contract us !

Company :Nanjing Hi Transfer Digital Technology Co.,Limited
Website:http://hitransfer.com/about.php
Facebook:https://www.facebook.com/techsublimation
Twitter:https://twitter.com/techsublimation
Linkedin :https://www.linkedin.com/in/tech-sublimation-548a7a133/
Google+:https://plus.google.com/u/0/107910599828124340419
VK:https://vk.com/sbpaper
whatsapp:+8615756007679

The Seven Steps to Maintenance Your Oric Inkjet Printer

Oric wide-format inkjet printer, as the inkjet printer industry leader, both in terms of print effects or applications, have a lot of advantages. First of all, oric inkjet printer 1.8 m body weight of 700 kg or more, high weight that the body stability is good, when the body is stable when printing, then print out the picture color stability, there will be no broken, fuzzy ; Oric inkjet printer ink system is perfect, generally 4-color, 6-color and 8-color optional, so to ensure that the print picture is full of color, can apply different printing needs; Finally, Oric inkjet printer can be installed domestic 5113 nozzle and Epson DX-5 nozzle, 5113 nozzle print speed, but low precision, to meet the needs of the industrial level of production, DX-5 nozzle print speed is slow, but high precision, to meet the needs of high-end consumer market, switching makes the printer more versatile.

Oric inkjet printers because of its good quality, so make it a wide range of use, for all walks of life, low-end mid-range and high-end consumer market can use this inkjet printer.
1. Polyester and polyamide fabrics, spandex, lycra, nylon used in sports apparel and outdoor clothing
2. Plastic substrates like skis, snowboards, skateboards and surfboards
3. Mixed synthetic fabrics(used in sports apparel and outdoor clothing) with a minimum polyester content of 60%


However, although the oric inkjet printer in the use of the scope and quality are very good, but for your routine maintenance is always unavoidable, the machine will not make a long time maintenance will make the parts have a certain problem. Maintenance is divided into the following seven areas:
1. Machine maintenance: regular cleaning machine external and internal all the dust. caution: always turn off the machine's total power before cleaning. And then boot, be sure to ensure that the circuit part of the machine is not contaminated with liquid.
2. Machine track cleaning: Alcohol will be wiped the track of the machine, and in the track on the appropriate amount of lubricant to reduce the wear and tear on the track bearing, reducing the noise of the machine work. The following are the same as the "
3. Raster bar and grating disk cleaning: every week with alcohol will CR grating and PF grating plate wipe clean, in the wipe, wipe in one direction, do not wipe back and forth to avoid scratches. The following are the same as the "
4. Maintenance of the CR belt and strip: The CR deceleration belt can be maintained for one to two months. Add a small amount of lubricant to the CR deceleration belt and the T-type wheel. When cleaning the steel belt, wipe with alcohol in one direction The
5. Sprinkler maintenance and maintenance: every day to carry out maintenance of the nozzle, the car moved to the left, with ink brush plus cleaning fluid to wipe the nozzle around the cleaning nozzle to protect the debris on the chip to prevent the nozzle nozzle situation, Something in the nozzle hole surface scratches, so as not to damage the nozzle. At the same time every day when the machine is not shut down, must be cleaned once, and to ensure that the printer test strip after the normal shutdown, to prevent nozzle overnight block. The following are the same as the "
6. Cleaning the ink stack and the blade: After the machine is finished, clean the ink stack system, wipe the blade with alcohol or pure water, clean the chip and the ink on the stack. Resistance, or ink cap cap on the silt, hair caused by machine failure. Do not drop the ink or cleaning liquid into the machine circuit section during cleaning.
7. Sprinkler electromagnet and its small car body body cleaning: pictorial machine spray around the solenoid to wipe every day, because it is part of the circuit, with a dry paper towel or cotton can be wiped. So as to avoid serious ink, ink accumulation for a long time too much, resulting in can not work properly, resulting in small frame and its machine motherboard damage. Small frame left and right baffle is the place where the ink accumulates most, need to do some cleaning every week, wipe with alcohol, wipe, avoid wiping the circuit part and the nozzle.

I believe that the above seven aspects of the daily maintenance and maintenance, the printer will reduce the number of failures, and print quality and effect is still as good as that is good.

We are a professional manufacturer of oric inkjet printers, responsible for the development and production of machines. For this new machine, if you have any needs and problems, please feel free to contact us.

Welcome to contract us !

Company: Nanjing Hi Transfer Digital Technology Co.,Limited

Website: www.Hitransfer.com

E-mail:sales@Hitransfer.com

Whatsapp: +008615756007679

-------------------

*FOLLOW ME

Facebook:https://www.facebook.com/techsublimation

Twitter: https://twitter.com/techsublimation

Google+ https://plus.google.com/u/0/

Pinterst https://www.pinterest.com/techsublimation/

Blogger:tech-sublimation.blogspot.com