Sublimation printer is a computer printer which uses heat to transfer dye onto materials such as a plastic, card, paper, or fabric. The sublimation name was first applied because the dye was considered to make the transition between the solid and gas states without going through a liquid stage. Many consumer and professional dye-sublimation printers are designed and used for producing photographic prints, ID cards, clothing, and more.
As we all know ,sublimation printer always work with RIP software .And so that can get more beautiful images ,get higher print quality .
But when we are printing , we always meet so many trouble,like sublimation printer can not connect with RIP software,so how to solve this trouble ?Follow me ,I will tell you .
1,Check the connection of the USB Cable
Remove the USB cable at the end of the Machine side and re-connect it again
Remove the USB cable at the end of the PC side and re-connect it again
Switch USB socket on PC to another side if the PC has several sockets
Checking cable condition of the USB Cable that make sure no hurt or any damage on the Cable
Remove other USB devices if there are some devices connected
Checking standard of the PC and USB Cable
2,Checking of PC USB connector and USB cable are standardized USB 2.0
Checking standardized correspondence of USB2.0 of USB Cable. Standard length for USB cable is Max.5m. If cable length is not enough from USB port of Machine to PC, prepare extension cables. Check the USB connection if data transfer is no problem before using extension cable. (Extension cable cannot connect more than 3 cables, except JFX. (Extension cable cannot connect more than 2 cables for JFX)
Replacing USB cable with other one
Checking of the PC specification. If PC Specification is not enough speed Machine will wait the data from PC and sometime Head carriage go back to the Home position until enough data received.
Data is received when printing mode is indicating in the Printer panel. During this time if the head carriage is stopped at home position 2 or 3 seconds or more, possibly printing data is not coming from PC quick enough
3,Away from the electrical Noise
Checking and moving some large machine which is created noise on electrical circuit and away from Mimaki Machine
Mounting ferrite core on the USB cable to remove noise on the USB Cable
4,Other checks
Trying performing of Data clear once
Rebooting of the Machine and the PC
Retrying printing of same data from spooling
When Mimaki Raster Link Pro software is used, check correct Machine in the Raster Link Pro setting
Open the Printer Management window of Raster Link Pro
Check Printer name and port See the Raster Link Pro Installation guide for the detail) ※ If multiple printers are connected to 1 PC, target machine could not detect because Machine name has same name. In case of this, switch / in the machine panel and click on [Renew status] in Raster Link Pro
If you still have this error, please contact service.
More Info:
Company:Nanjing FeiYue Digital INC.
Website:http://www.skyimagepaper.com/
facebook:https://www.facebook.com/burberry.chen.1
twitter:https://twitter.com/techsublimation
linkedin:https://www.linkedin.com/in/tech-sublimation-548a7a133/
google+:https://plus.google.com/u/0/107910599828124340419
vk:https://vk.com/sbpaper
whatsapp:+8615756007679
More Info:
Company:Nanjing FeiYue Digital INC.
Website:http://www.skyimagepaper.com/
facebook:https://www.facebook.com/burberry.chen.1
twitter:https://twitter.com/techsublimation
linkedin:https://www.linkedin.com/in/tech-sublimation-548a7a133/
google+:https://plus.google.com/u/0/107910599828124340419
vk:https://vk.com/sbpaper
whatsapp:+8615756007679
没有评论:
发表评论