Oric inkjet printers because of its good quality, so make it a wide range of use, for all walks of life, low-end mid-range and high-end consumer market can use this inkjet printer.1. Polyester and polyamide fabrics, spandex, lycra, nylon used in sports apparel and outdoor clothing
2. Plastic substrates like skis, snowboards, skateboards and surfboards
3. Mixed synthetic fabrics(used in sports apparel and outdoor clothing) with a minimum polyester content of 60%
However, although the oric inkjet printer in the use of the scope and quality are very good, but for your routine maintenance is always unavoidable, the machine will not make a long time maintenance will make the parts have a certain problem. Maintenance is divided into the following seven areas:
1. Machine maintenance: regular cleaning machine external and internal all the dust. caution: always turn off the machine's total power before cleaning. And then boot, be sure to ensure that the circuit part of the machine is not contaminated with liquid.
2. Machine track cleaning: Alcohol will be wiped the track of the machine, and in the track on the appropriate amount of lubricant to reduce the wear and tear on the track bearing, reducing the noise of the machine work. The following are the same as the "
3. Raster bar and grating disk cleaning: every week with alcohol will CR grating and PF grating plate wipe clean, in the wipe, wipe in one direction, do not wipe back and forth to avoid scratches. The following are the same as the "
4. Maintenance of the CR belt and strip: The CR deceleration belt can be maintained for one to two months. Add a small amount of lubricant to the CR deceleration belt and the T-type wheel. When cleaning the steel belt, wipe with alcohol in one direction The
5. Sprinkler maintenance and maintenance: every day to carry out maintenance of the nozzle, the car moved to the left, with ink brush plus cleaning fluid to wipe the nozzle around the cleaning nozzle to protect the debris on the chip to prevent the nozzle nozzle situation, Something in the nozzle hole surface scratches, so as not to damage the nozzle. At the same time every day when the machine is not shut down, must be cleaned once, and to ensure that the printer test strip after the normal shutdown, to prevent nozzle overnight block. The following are the same as the "
6. Cleaning the ink stack and the blade: After the machine is finished, clean the ink stack system, wipe the blade with alcohol or pure water, clean the chip and the ink on the stack. Resistance, or ink cap cap on the silt, hair caused by machine failure. Do not drop the ink or cleaning liquid into the machine circuit section during cleaning.
7. Sprinkler electromagnet and its small car body body cleaning: pictorial machine spray around the solenoid to wipe every day, because it is part of the circuit, with a dry paper towel or cotton can be wiped. So as to avoid serious ink, ink accumulation for a long time too much, resulting in can not work properly, resulting in small frame and its machine motherboard damage. Small frame left and right baffle is the place where the ink accumulates most, need to do some cleaning every week, wipe with alcohol, wipe, avoid wiping the circuit part and the nozzle.
I believe that the above seven aspects of the daily maintenance and maintenance, the printer will reduce the number of failures, and print quality and effect is still as good as that is good.
We are a professional manufacturer of oric inkjet printers, responsible for the development and production of machines. For this new machine, if you have any needs and problems, please feel free to contact us.
Welcome to contract us !
Company: Nanjing Hi Transfer Digital Technology Co.,Limited
Website: www.Hitransfer.com
E-mail:sales@Hitransfer.com
Whatsapp: +008615756007679
-------------------
*FOLLOW ME
Twitter: https://twitter.com/techsublimation
Google+ https://plus.google.com/u/0/
Pinterst https://www.pinterest.com/techsublimation/
Blogger:tech-sublimation.blogspot.com
没有评论:
发表评论