What You Do Wrong For Maintaining Nozzle?

Inkjet printer inkjet quality and poor, which is mainly reflected in the focus on the piezoelectric nozzle, such as the common nozzle plug, broken and serious damage to the nozzle will affect the pictorial inkjet print normal output.

In the use of inkjet printers, nozzle maintenance more need for our careful treatment, especially for novice users, the nozzle maintenance, more or less there will be some wrong way, especially some improper operation of the nozzle maintenance, It is likely to directly damage the nozzle, or cause more serious consequences. The nozzle is the core part of the inkjet printing equipment, if the correct use and maintenance, can greatly extend the life, but because of some incorrect operation, then accelerated the nozzle loss. Shenzhen Wuteng photo machine manufacturers summed up some of the wrong way on the maintenance of the nozzle, I hope that customers in the daily maintenance operations to avoid these common mistakes, so that the useful life of the nozzle for your inkjet printing business to obtain a better profit return

The following several nozzle operation is most likely to damage the behavior of the nozzle, you have a few?
1: inkjet printer maintenance disassembly nozzle without power.
In the case of power is not completely shut down, free to install or remove the pictorial circuit, this wrong way to easily lead to the relevant circuit short circuit, especially the nozzle, more likely to cause damage to the nozzle, so this operation must pay attention to broken Electricity after the operation.

2: do not pay attention to electrostatic protection
Piezo photo machine normal inkjet printing work by electrostatic impact, so in the nozzle maintenance operation do not hand contact with the nozzle, maintenance nozzle to wear protective gloves, you must always check the ground connection.

3: do not regulate the location of the nozzle
When using the external force to adjust the nozzle position, whether it is to replace or fine-tune the nozzle, do not use brute force, please follow the norms carefully treat the nozzle.

4: Use inferior ink
The use of low-quality ink and free replacement of different batches of ink and ink suppliers, low-quality ink will not only affect the color and quality of print patterns, but also damage to the picture machine nozzle, serious may also cause nozzle clogging and other irreversible Loss, it is recommended that users must choose the original ink manufacturers or manufacturers recommend ink, this is very important, do not seek cheap and cause large operations, due to small and lost.

5: improper use of cleaning fluid
In the Wuteng photo machine site content, also shared the relevant cleaning fluid immersion nozzle use operation, nozzle maintenance article, we have said that the nozzle soaked in the cleaning solution 1 to 2 hours. Cleaning the solution for a long time is conducive to clear stains, but if the nozzle in the cleaning solution soak for more than 2 days, there will be negative effects, as we soak the nozzle of the longest time should not exceed 30 hours. In addition, the entire nozzle placed in the cleaning solution soaked, this way is not desirable. As the nozzle there are many electronic components, and cleaning fluid are mostly corrosive, so when you must soak the soak, can only soak the spray on the site, or directly take the right amount of cleaning fluid into the nozzle cleaning, In the cleaning nozzle should pay attention to the circuit board and other exposed electronic components do waterproof treatment.

6: frequent cleaning nozzle operation.
Frequent cleaning nozzle is also an inappropriate behavior, on the one hand the waste of the larger ink, on the other hand the nozzle will also have a certain impact. Sprinkler cleaning frequency is generally recommended once a month thoroughly cleaned, in the usual use of the software in the "automatic cleaning" function can be.

Some of the common mistakes mentioned above, will be easy to bring bad damage to the nozzle, these pictures of the wrong way to maintain the nozzle, you a few bars? If the operation exists, please correct it.

Company:nanjing hi transfer digital technology co.,limited
website:http://hitransfer.com/index.php
facebook:https://www.facebook.com/burberry.chen.1
twitter:https://twitter.com/techsublimation
linkedin:https://www.linkedin.com/in/tech-sublimation-548a7a133/
google+:https://plus.google.com/u/0/107910599828124340419
vk:https://vk.com/sbpaper
whatsapp:+8615756007679