2017年6月15日星期四

How to Solve The Problem of Mimaki Large-format Printer ?

Recently many customers are asking me about the price of Mimaki printer, as a brand printer, Mimaki wide printer can not only use sublimation ink, but also use weak solvent ink to print like Mimaki JV150-160 . And often used to print outdoor advertising, the effect is very good.


However, any printer, in peacetime maintenance if do not in place, or in the printing process is not noticed, there will be a lot of problems. Now, the problems that arise often come up with solutions.

One, cut the ink plug nozzle:
Processing method:
1, Operation panel Clearning cleaning nozzle.
2, check ink volume or after 1 steps also broken ink Select function Key Function. Maintenance up Ink OK, the machine began to ink cleaning.
3. Bubble nozzle.
4, check the ink sac change.
5, check whether the ink pump can smoke

Two, unable to test the paper error 50:
Processing method:
1, the new paper, paper to be flat, not too far left or too close to the right, the right paper in general on the right of the first pressure wheel around.
2, check the side of the sensor sensor light is stained with ink, if it is removed with alcohol clean can.
3, check the paper Sensor sensor light is on the black belt whether there is debris or fall off.
4. Replace the paper sensor.

Three, the process of drawing ink processing
Processing method:
1, the nozzle sticky debris need to be cleared.
2, the scraper position did not adjust well.
3, the bottom of the nozzle or ink stack location is too dirty

Four. Error 08:
Processing method:
1, check whether the grating is stained with ink or other, with alcohol and soft cloth wipe clean.
2. Check whether the grating sensor is stained or soiled.
3, replace the grating or grating sensor.

Five. Broken data:
Processing method:
1. Replace the USB cable.
2, Reload Maintop.
3. Check the anti-virus software to isolate the data.
4, computer problems, change the computer.

Six. Stepping Questions:
Processing method:
1, adjust the step, press the function key on the online state, determine two, press the upper and lower key to modify and then determine.
2. Check whether the roller spring is off, and clean the paper wheel with alcohol regularly.


Seven. Machine Newspaper Press ent key error handling:
Processing method:
1, check the front cover sensor is loose without shielding.
2. Check the cover of the maintenance area.


Eight, Manual ink:
1, when the ink bag open solenoid valve menu: Funcion "" "Chitest" "" "" Ink Cartridge "" "" "" Cartridge. Valve.

Nine, play the picture to appear ghosting:
Processing method:
1, check whether the two-way calibration calibration.
2, check whether the grating bar is dirty or scratches and grating sensor sensor (general use of alcohol cleaning and replacement to check), if there is damage please replace!

Ten, panel common hints or alerts:
Processing method:
1, close a cover, the lid is opened, check the front cover and maintenance is open or not installed.
2, Sangong Media, not detected materials, installation materials can be.
3. L. 1! Replace a wiper, change the scraping time to, scrape the count to reach a certain value, perform St. Maintenance Exchange elimination.
4, Wrong ink IC------CCMM, cartridge chip can not be read, reseat the cartridge or replace the chip.
5, Nearfull Waste tank, waste ink bottle is about to fill, pour waste ink.
6, Wastetank Full None, Waste ink bottle is full, pour waste ink.
7, Washliuquid. None, cleaning fluid not installed.

These are some of the areas that need to be noticed in the daily use of Mimaki wide printers. Our company specializes in providing original Mimaki wide-width printer, if you need, please feel free to contact me.





发帖者 时间：
标签： , , ,

没有评论:

发表评论

订阅： 博文评论 (Atom)