2017年2月22日星期三

How do users save sublimation printing ink?


　
       Sublimation printing industry has three main consumable materials, one is sublimation paper and the other is sublimation ink, another one is clothing. As we all know, sublimation ink is quite expensive nowadays. If you want to add value to your products, sublimation printing is a great way to do that! So here is the point, how do we save the sublimation ink for our business?
   
   Knowing the economized way of inkjet printer has two basic advantages: not only cut down the cost of sublimation ink output, but also a advocacy to environmental-friendly way. Here is some suggestion for you guys:
refill ink

1. Make sure that the filling ink cartridge is intact;

2. Try to use high quality original ink to fill which should be compatible for your inkjet printer.(Epson original ink for F6280)

3. When filling ink into cartridge, you should be carefully about the right amount;

4. When finish filling, it is better to wait for a while to let the ink gradually permeate into the every corner of the rubber cushion. This can slowly to ensure that the final print quality and avoid re-printing of the non-ideal effect.  

5. When there is a need to refill ink into cartridge, the correct way is: Before adding ink, jet water into ink cartridges with a syringe; try not to let the water overflow, and gently shaking a few times, so that the residual ink could be fully dissolved in the water. If shake with too much force, there would occur liquid overflow, dry it with a paper towel or cloth in time, in case to cause hardware failure and circuit board; then repeatedly pump for several times until see the pumped liquid color is light ,then wash ink cartridge with printer's own procedures for cleaning.
Epson print head

6. To avoid long explosion of the ink cartridge to the air resulting in dry jam phenomenon, although there are ways to clean it, but it should be refilled in the cartridge immediately after the ink is going to run out ,and immediately do printing after filling ink. If the printer does not use temporarily, you can also put nozzle in the special storage box, one of the special rubber mat can cut off the air, keep the nozzle long wetting;

7. If the cartridge and print heads are integrated together, It is necessary to do something prevent the damage to the nozzle. Otherwise, once the nozzle blockage or damage, ink cannot be used repeatedly.
   In addition, in the process of frequent use, nozzle may be clogged by splashed- back paper fiber, which would lead to the bad effect of nozzle output, if there must be some waste of ink. Regular nozzle cleaning is also very necessary. When cleaning nozzle, you should try to use wet paper towels and have no cotton paper towel gently clean the edge of the nozzle, and don't touch the nozzle, and then recycled inkjet printer cleaning until the print effect is clear.

-----------------------------------------------------
 *Information
Company: GetWin Industrial Co.,LTD
Whatsapp: +008618196645969
-------------------
*FOLLOW ME




发帖者 时间： 没有评论:

2017年2月19日星期日

Epson original ink particularly for Epson F-series printer in sublimation filed

This Epson original ink is developed by Epson as the biggest consumable materials for Epson F-series printer. Why I mentioned Epson F-series printer again? 
Epson SC printer & Epson original ink
For many people misunderstand my post, and ask me about Epson regular sublimation ink, but we cannot offer them support. This Epson original ink is sublimation ink of course, but they are merely matched with Epson SureColor F6200/7200/9200/ etc. While these printers can also be used with other sublimation inks with replaceable chips ,if the users take budget into account and seek for cheap one as alternation.
  
Epson original ink with chips
   These packs of Epson original ink are with 1000ml each pack equipped with one-time chips. The color includes: Cyan,Megenta,Yellow,HDK. When used with sublimation paper for high quality inkjet printing, the true color transferred on Polyester, Nylon, Polyurethane, etc, and also on porcelain, plastic, carpentry, etc. materials with coating will be much greater in vivid color, color durability, good fastness.Besides,this type of sublimation ink is made for Epson F-series printer, so it has high compatibility with the TFP print head which is the most expensive part to the printer.
This water-based ink particle has small particles not more than 0.1 micrometers. This characteristic guarantees the smooth and fine printing result and will do no harm to the use of print head if keep in good maintenance.

The sublimation ink plays a key role to the printer. If you choose high quality general ink, it will trouble you less in daily printing and do less lost to your business!


-----------------------------------------------------
 *Information
Company: GetWin Industrial Co.,LTD
Whatsapp: +008618196645969
-------------------
*FOLLOW ME
发帖者 时间： 没有评论:

2017年2月16日星期四

How to deal with ink extended-capacity problem of Epson printer

   Some people may encounter waste ink hints while using Epson F-series printer, but some don't know how to deal with it.There are some discussions in the forum: when you meet the ink over-capacity indicator, you only need to operate printer maintenance program and reset the ink waste counter.In fact, can you really solve this problem?
Epson SureColor Printer
1.About Reset
  Actually, ink counter reset just zeros out waste ink counter from the printer which does not solve the problem from the source. 
  Just do printer program resetting without cleaning the waste ink pad, waste ink in the pad still continues to increase. When the printer keeps working, once the pad filled with ink, overflow will come up. More serious consequence is that the waste ink flow  do damage to the internal circuit board (cause short circuit).Although the waste ink don’t overflow, waste ink steam will also damage to the printer circuit boards, action mechanism and even the shower nozzle.
Epson F6280

  2.About Waste Ink Alarm
     There are some friends think when printer ink waste warned super capacity, waste ink pad isn’t really full, so there is no need to clean the waste ink pad.   
      Actually in many places, such as: high temperature region, when printer ink alarm, waste ink pad is not much full of  ink, and printer manufacturers left some space reservation on the waste ink alarm Settings to remind users in advance. However, if we do not attention it, variate in waste amount such as temperature, air humidity, printer if there is a leakage, etc. To avoid illusory indicator, you should know your printer very well, just look after it like your baby.

-----------------------------------------------------
 *Information
Company: GetWin Industrial Co.,LTD
Whatsapp: +008618196645969
-------------------
*FOLLOW ME





发帖者 时间： 没有评论:

Something about ink cartridge you should know

Epson printer cartridge is a big consumable materials to the users. As we all know, there are original and non-original cartridges. This article will enhance your understand of cartridge to achieve not only lower the cost of consumables and but also improve printing quality.
Epson F9200
Can cartridges be filled with ink for infinite time?
Some people think ink cartridges is just an ink container, as long as the cartridge without damage fracture, it can be filled with ink unlimited times. Actually, this is a big mistake.
ink cartridge

A． For the sponge inside of the ink cartridges, it has a certain life. Cartridge works rely on repeated absorption and release of sponge, when used over a certain time, the absorption and release ability of sponge will decline, which will cause the filling ink not be completely absorbed by cartridges sponge. However, at that time, the increased pressure will do to the nozzle from the inks which will lead to the ink flow from the nozzle. But more serious is that for inkjet printer can't monitoring this part of inks, it could lead to the waste ink pad to withstand overload, while the printer has not yet issued a super capacity waste ink alarm, waste ink has been spilled. The damage to the printing devices is inevitable.
B.  Between the cartridge and nozzle, there is actually a sealing ring to prevent the ink leaking. For a long time use or many times reassemble, it can fasten aging of sealing ring, in severe case, it can cause ink leaking. The phenomenon of mixed color ink will affect the print quality, such as: Graphic printing need printing more color to slowly return normal, but lead to waste of ink.
Notice:

   When the filling of ink cartridges is more than ten times or the use ink cartridge for more than a year, it is best to replace the cartridge to avoid unnecessary damage to your printer. If you use Epson F-series printer for sublimation printing, you’d better use Epson original ink for sublimation printing!
Epson original ink





-----------------------------------------------------
 *Information
Company: GetWin Industrial Co.,LTD
Whatsapp: +008618196645969
-------------------
*FOLLOW ME


               inkjet-printer001.blogspot.com



















发帖者 时间： 没有评论:

2017年2月14日星期二

The pros and cons of using permanent chips


    In recent years, there are more and more continuous ink systems in the market, and its application is becoming more and more widely. At this time Epson printer users largely accepted cartridges permanent chip.

Epson SC printer


     
There are two advantages in short run of the permanent chips:
chips

    First, these chips do not need to decode. As long as the printer shuts down, the counter of chip will be reset which deceive the printer that ink cartridge is full.
    Second, you need not to do nozzle washing, that is to say, after startup, printer does not perform nozzle cleaning action which can achieve the purpose of saving ink.

  * To family user, you should better not use permanent chip for the printer long time in idle will aggravate the residual ink stickiness/ viscosity and clogging. Such not only can save ink, also can cause more waste of paper and ink.
   *To mass production, continuous ink system can meet the requirements of its low cost, dry ink is brought out by the new ink, so it is not easy to appear congestion. 

  But there are also many reflections that print quality is reduced after long time use of continuous inks. Some friends think this is because the aging of print head or poor quality of ink. But when do the nozzle cleaning, they found there are a lot of the nozzle can jet ink, but the jet ink has obvious phenomenon of mixed color. After cleaning the nozzle, the print quality will be improved. Actually, that is because a part of the nozzle clogging and you cannot observe that when do the test page prints. In fact this jam make out drops smaller, let ejected drops coverage is not enough, and at the same time can also lead to jet ink flying angle, deviation orientation in the paper, such draft printout shows particle coarse.

    When using a permanent chip ,printer do not do automatic nozzle cleaning, and users also careless of the jam for not frequent cleaning. Such impurities are easy to stick on the nozzle wall for a long time and not easy to clean.Epson printer users must bear it in mind.

-----------------------------------------------------
 *Information
Company: GetWin Industrial Co.,LTD
Whatsapp: +008618196645969
-------------------
*FOLLOW ME

               inkjet-printer001.blogspot.com



















发帖者 时间： 没有评论:

How to do cleaning and maintenance of Epson printer

      Epson printer lovers and users should know something to take care of their printer if you wanna elongate the use value. The printer can do well in normal using without fault, if the printer owner is a careless man,it is no wonder that the service life time is be decreased. So it is very pivotal to do basic maintenance.
inkjet printer


     General cleaning and maintenance work includes the following steps:

1. 
    Open the inkjet printer cover, carefully clean the printer internal dust and stains, ink and piece paper, especially the car drive shaft. You can use dry degreasing cotton swabs to erase the dust on the guide shaft and oil .After cleaning you can add two drops of sewing machine oil on the shaft.

   When do the cleaning work ,please be careful not to wipe the area around the gear, the print head and cartridge, do not move the print head, also cannot use diluent, gasoline and other volatile liquid.

   In addition, the nozzle cleaning do not use hand to do it as far as possible ,the best way is to make use of the software control system to do the print head cleaning procedures, especially after adding ink, be sure to clean the print head and prevent two kind of ink mixing and coagulation.

2.
   In addition, if there was occurring a strip printing speckle, color print quality loss, it also need to clean the nozzle. If the block is relatively serious, you need to clean the nozzle with a syringe, constantly pull pressure device, let the high speed air flow cleaning nozzle.
nozzel cleaning

   Inkjet printer can't be idled for a long time, because every spray , there is always residual ink on nearby; if do not often use inkjet printer, ink will gradually be condensed, causing nozzle clogging; If use frequently, this problem will solved for new ink in the ink cartridge would wash away the last remaining ink.
3.
   You should better switch on at least once a week. When printer is starting up,it will do preheating and nozzle cleaning program automatically, while the ink drops attached on the nozzle can be dropped out, avoid the drops to stay for a long time on the nozzle. A nozzle check can effectively detect the usage of the nozzle.
Epson F6280

   Open the printer cover, you will see the printer has a relatively smooth iron cross inside, meanwhile, the industry known as the guide, with lubricating oil, which is the orbit of print head. In fall and winter because the day is cold, lubricating oil is easy to get solidification, combined with the daily dust which will continually hit guide bar. Over a long time in the winter, there is likely to come up head-hitting phenomenon. If you want to avoid this kind of circumstance happening, best way is to add a few drops of precise lubricating oil on the guide bar, and try to leave some impurity removal of guide bar on the original.

-----------------------------------------------------
 *Information
Company: GetWin Industrial Co.,LTD
Whatsapp: +008618196645969
-------------------
*FOLLOW ME

               inkjet-printer001.blogspot.com
















发帖者 时间： 没有评论:

2017年2月13日星期一

How to do daily maintenance of inkjet printer

       Today there are many users of ink-jet printer,from mini-size home Epson printer to large format Epson printer.However, the printer is prone to be damaged if you are careless of it.If the users of ink-jet printer don't pay attention to the printer maintenance, the problem in printer will occur frequently. 

Epson large format printer

      In fact, the characteristic of ink-jet printer make itself strict to the working environment, especially in the cold, dry climate. If not do careful maintenance, it may cause print nozzle clogging, ramming, serious even can make the nozzle crackdown. Once come up this kind of fault, it is really troublesome and money-consuming. So the maintenance in the former is the most sensible.

1.Prevent the dust and solidification is the most important to the inkjet printer.

   In general, small home or office printers should not place on the ground as far as possible, especially the carpeted floor, because it is easy to absorb dust into the machine. The same does large format printer.And in winter season or cold, dry climate, the printer user should better cover a large thick piece of cloth on the printer, especially the mouth to paper feeding and paper outlet.


nozzle

  The nozzle in the printer will be clogged for the cold, dry atmosphere day by day, if you can guarantee space without more cold air, the damage to the nozzle will be decreased, the deterioration of printing effect will be largely avoided.
   In addition, due to the working ways of printer itself, it must be put horizontally on the ground, if inclined to work, it will not only affect the print effect, but also slow down nozzle working speed, damage the internal mechanical structure as well.

2.Pay attention to clean

  Form the good habit of regular cleaning inkjet printers which can make the printer in good working condition.

  External side of printer can be rubbed with wet soft cloth, clean liquid must be neutral substances such as water, alcohol must not be used. Internal side should be rubbed with dry cloth and try not to contact the internal electronic components, machinery, etc.


-----------------------------------------------------
 *Information
Company: GetWin Industrial Co.,LTD
Whatsapp: +008618196645969
-------------------
*FOLLOW ME

               inkjet-printer001.blogspot.com



发帖者 时间： 没有评论:
订阅： 博文 (Atom)