1,The printer should return to the initial position before the printer is turned off. Some printers automatically move the printhead to the initial position before turning off, and some of the printers are shut down when the shutdown is determined to shut down. The print head back to the initial position can be protected by the seal, so that the nozzle is not blocked, you can also avoid the next boot the printer to re-clean the print head operation waste ink;
2,Please note that their printer is in the initial position in a mechanical lock, if this situation, hand moving the print head is unable to move its initial position, if the use of strong to remove the print head will damage the printer mechanical parts, this Time should be looking for professionals to operate their own blind operation is not;
3,When the ink cartridge runs out of the ink, of course, need to re-replace the cartridge, but we all know, a new ink at least tens of dollars, so many users with ink compatible ink to ink, so you can save a production cost. It is not advisable to advocate this practice, but compatible ink is knowledgeable. Ink in inkjet printers requires ultra-small molecular weight, moderate permeability, a certain viscosity ratio and chemical inks, as long as this is Can make the ink in the nozzle on the control of inkjet, in order to ensure the accuracy of printing, if compatible with the ink above the standard, then it is easy to plug the nozzle, which is the user needs to pay attention to the problem;
4,Replace the cartridge, be sure to follow the steps in the operating manual, but also in the case of power to open the operation, because the replacement of the cartridge, the printer will charge the ink delivery system, the process in the shutdown state Is not able to complete the same time, the shutdown state can not detect the cartridge;
5,Some users asked such a question, why installed a new cartridge or can not print, it may be due to the 4 o'clock, as is the machine installed ink cartridges, while a part of the printer's ink capacity is measured using the printer inside Electronic counter to calculate, when the counter reaches a certain value, the printer to determine the ink exhausted. At this time, after the replacement of the cartridge, the printer will automatically reset the internal electronic counter to confirm the installation of a new cartridge;
6, It is well known that the ink is conductive, but many users do not realize that when the ink spilled on the circuit board, they are just a simple wipe to deal with the matter, this is actually wrong, the correct method of operation should be used Water alcohol wipe, dry and then energized, otherwise it is easy to burn the circuit board;
7,If you think the nozzle problems, should not be charged in the state of the demolition nozzle, at the same time, do not put down the nozzle on the static more places, so as to avoid damage caused by static internal nozzle;
8, The cartridge should not be used in the long-term long-term direct exposure, should be placed in the room, otherwise it is easy to degenerate.
The above is about inkjet printers in the daily use of the need to pay attention to the aspects of the machine itself is expensive, parts are so, replace or buy new will increase production costs. In the daily use of more attention, then it will extend the life of the machine, reducing costs.
We are a professional manufacturer of inkjet printers and a manufacturer of sublimation printing products. We can provide a complete set of products for sublimation printing. If you have any questions, please feel free to contact us.
Welcome to contract us !
Website: www.Hitransfer.com
E-mail:sales@Hitransfer.com
Whatsapp: +008615756007679
-------------------
*FOLLOW ME
Twitter: https://twitter.com/techsublimation
Google+ https://plus.google.com/u/0/
Pinterst https://www.pinterest.com/techsublimation/
Blogger:tech-sublimation.blogspot.com
没有评论:
发表评论